Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® Clear G850 Rnew® MED - PA* - ARKEMA

Material Data Center offers the following functions for Rilsan® Clear G850 Rnew® MED:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan Clear datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
PA,,MHT,C16-020

Rilsan® Clear G 850 Rnew® MED is a high performance transparent copolyamide having outstanding purity level, partially based on renewable resources. This grade offers highest quality  and is specifically designed to meet the stringent requirements of the medical applications.

The percentage of renewable carbon measured according to ASTM D6866 is 45%.

Main applications:
  • Dental accessories
  • Breathing mask
  • Medical perfusion tube accessories

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.6 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.8 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione - / 1670 MPa ISO 527
Carico unitario a trazione - / 61 MPa ISO 527
Deformazione a snervamento - / 8 % ISO 527
Deformazione nominale a rottura - / >50 % ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C - / 7.5 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C - / 7 kJ/m² ISO 179/1eA
Durezza Shore D 78 / * - ISO 7619-1
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di transizione vetrosa, 10°C/min 150 / * °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa 120 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 135 / * °C ISO 75-1/-2
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 4 / * % Sim. alla ISO 62
Assorbimento d'umidità 1.7 / * % Sim. alla ISO 62
Massa volumica 1010 / 1010 kg/m³ ISO 1183
Biobased content 45 % -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Caratteristiche speciali
Trasparente
Certifications
Contiene risorse rinnovabili
Applicazioni
Medicale
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Stampaggio ad Iniezione
Processing conditions:
- Typical melt temperature  (Min / Recommaneded / Max)  : 250°C / 280°C / 300°C
- Typical mold temperature  : 20 - 80 °C
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.